With cordite in the air, splintered steel, shell casings and powder burns, there’s only one explanation...
Post feedback & meet new friends. General SG discussion.

Moderators: Pardner, TheDoctor

Re: greyscale, demo recording and video

Postby Biondo » Fri Jun 07, 2013 2:58 pm

Thanks for the answer. Yes, my intention is to record the demo using normal settings, and next convert it to a video using the best possible settings. I didn't express my thought in a clear way.

But it's not clear to me which are the best settings.

I didn't know of r_ext_multisample, I'll try to understand what it does. But what about other settings?

Sorry, playing with r_picmip 9, I'm absolutely ignorant about SG graphics/settings.
User avatar
Biondo
SG Website Designer
 
Posts: 542
Joined: Thu Oct 15, 2009 4:35 pm



Re: greyscale, demo recording and video

Postby TheDoctor » Fri Jun 07, 2013 3:27 pm

Biondo wrote:But it's not clear to me which are the best settings.
As I tried to communicate, the default settings are quite good looking, therefore revert to a fresh q3config.cfg. Then, only a few parameters need to be increased, like Trilinear Texture Filter, very high Curves Detail and Cinematic Map Detail and, of course, the target resolution.
Image
User avatar
TheDoctor
Smokin' Amigo!
 
Posts: 805
Joined: Sun Jun 06, 2010 3:31 am



Re: greyscale, demo recording and video

Postby TheDoctor » Fri Jun 07, 2013 3:54 pm

TheDoctor wrote:Because r_ext_multisample "2" wouldn't work for me...

Good news, for all people using the r300 driver of mesa3d: seems, anti-aliasing was finally implemented. I've updated to mesa-9.1.2, and now r_ext_multisample works as it should.
Image
User avatar
TheDoctor
Smokin' Amigo!
 
Posts: 805
Joined: Sun Jun 06, 2010 3:31 am



Re: greyscale, demo recording and video

Postby Barto » Fri Jun 07, 2013 4:23 pm

I remember Floppy had a small cfg for that a while back. I haven't tested it though; maybe it's worth a try, who knows?
Here it is:
Code: Select all
//Mr. Floppy's OFFLINE/best visual config version 1.03

// Settings
//_______________________________________________

set com_hunkMegs "196"
set com_maxfps "2000"


// Graphics
//_______________________________________________

set r_colorbits "32"
set r_depthbits "32"
set r_drawSun "1"         //Toggle sunlight rendering into the equation of lighting
set r_detailtextures "1"
set r_displayrefresh "0"   //or 75, 85 or 120 :)... dangerous with high resolution...
effects. def=0
set r_dynamiclight "1"      //Dynamlic lighting on!
set r_fastsky "0"
set r_flares "1"         //New: flares on! ('effects of lightning')
set r_flaresize "150"      //New: size of the flares (def = 0)
set r_gamma 1.8
set r_lodbias "0"
set r_lodCurveError "1000"
set r_picmip "0.000000"
set r_roundImagesDown "0"   
set r_simpleMipMaps "0"      //or is "1" better?
set r_stencilbits "8"
set r_swapInterval "0"      //def=0, option 1 gives the best visuals, but FPS-drop.
set r_subdivisions "1"
set r_texturebits "32"
set r_textureMode "GL_LINEAR_MIPMAP_LINEAR"
set r_vertexLight "0"
set r_mode "-1"         //Set video display mode (res.). (R_mode 6 = 1024X768)
set r_customheight "1024"   //1280*1024, higher is possible too, depends hardware
set r_customwidth "1280"

// Sound
//_______________________________________________

set s_max_distance "1250.0"
set s_min_distance "1.0"
set s_mixahead "0.16"
set s_musicvolume "0.000000"
//set s_khz "22"

// SG cvars
//_______________________________________________
   
set cg_flysound "1"
set cg_talksound "2"
set cg_showescape "1"
set cg_hitmsg "1"
set cg_ownhitmsg "1"

set cg_boostfps "0"
set cg_glowflares "1"   //Glowing flares.
set cg_glassFragments "1000"
set cg_printTime "70000"

set cg_enableBreath "1"
set cg_enableDust "1"
set cg_smoothClients "1"
"Chuck Norris had to shorten his beard in the presence of Richard Stallman because two beards that awesome, so close would segfault the universe (again)."
User avatar
Barto
Jeuxlinux Admin
 
Posts: 356
Joined: Fri Oct 23, 2009 5:08 pm
Location: Switzerland



Re: greyscale, demo recording and video

Postby Biondo » Fri Jun 07, 2013 5:05 pm

Well, good answers. There's something I can start to work on. Thanks.
User avatar
Biondo
SG Website Designer
 
Posts: 542
Joined: Thu Oct 15, 2009 4:35 pm



Previous

Return to Saloon

Show Sidebar
Show Sidebar

User Control Panel